| B |
| Bed joints |
1.2 |
| Brick slip cladding systems |
1.2 |
| C |
| Cast stone sills |
1.2 |
| ceramic, concrete, terrazzo and similar tile finishes |
1.2
|
| Covers to drainage system |
1.2 |
| Curtain walling |
1.2 |
| D |
| Doors and windows |
1.2 |
| Drives, paths, decks, terraces and balconies |
1.2 |
| Duct casings |
1.2 |
| E |
| External reveals, straightness |
1.2 |
| External walls, appearance |
1.2 |
| External walls, tolerance |
1.2 |
| External works |
1.2 |
| F |
| Fairfaced masonry |
1.2 |
| Fitted furniture |
1.2 |
| Flatness of floor |
1.2 |
| Floors |
1.2 |
| G |
| Garage floors |
1.2 |
| Garages, blockwork walls |
1.2 |
| Gaps and distortion |
1.2 |
| Glazing |
1.2 |
| J |
| Joint sealants |
1.2 |
| K |
| Knots in timber |
1.2 |
| L |
| Level of bed joints |
1.2 |
| Level of floor |
1.2 |
| O |
| Openings in walls |
1.2 |
| Other surfaces and finishes |
1.2 |
| P |
| Painted and varnished surfaces |
1.2 |
| Perpend alignment |
1.2 |
| Plumb of wall |
1.2 |
| R |
| Rainscreen cladding |
1.2 |
| Rendering |
1.2 |
| S |
| Scratches |
1.2 |
| Skirtings |
1.2 |
| Sockets, switches and other service outlets |
|
| Standing water |
1.2 |
| Straightness on plan |
1.2 |
| Straightness in section |
1.2 |
| T |
| Thickness of bed joints |
1.2 |
| Tile hanging |
1.2 |
| Tile joints |
1.2 |
| Timber cladding |
1.2 |
| U |
| Underfloor service ducts |
1.2 |
| V |
| Variations in surface finish |
1.2 |
| W |
| Walls and ceilings, appearance |
1.2 |
| Wall and ceiling surfaces |
1.2 |
| Walls and ceilings, tolerances |
1.2 |
| Windows and door openings |
|
