B |
Bed joints |
S1 |
Brick slip cladding systems |
S1 |
C |
Cast stone sills |
S1 |
ceramic, concrete, terrazzo and similar tile finishes |
|
Covers to drainage system |
S1 |
Curtain walling |
S1 |
D |
Doors and windows |
1.2, S1 |
Drives, paths, decks, terraces and balconies |
S1 |
Duct casings |
S1 |
E |
External reveals, straightness |
S1 |
External walls, appearance |
1.2, S1 |
External walls, tolerance |
1.2, S1 |
External works |
1.2, S1 |
F |
Fairfaced masonry |
S1 |
Fitted furniture |
1.2, S1 |
Flatness of floor |
S1 |
Floors |
1.2, S1 |
G |
Garage floors |
S1 |
Garages, blockwork walls |
S1 |
Gaps and distortion |
S1 |
Glazing |
1.2, S1 |
J |
Joint sealants |
S1 |
K |
Knots in timber |
S1 |
L |
Level of bed joints |
S1 |
Level of floor |
S1 |
O |
Openings in walls |
S1 |
Other surfaces and finishes |
1.2, S1 |
P |
Painted and varnished surfaces |
S1 |
Perpend alignment |
S1 |
Plumb of wall |
S1 |
R |
Rainscreen cladding |
S1 |
Rendering |
S1 |
S |
Scratches |
S1 |
Skirtings |
S1 |
Sockets, switches and other service outlets |
|
Standing water |
S1 |
Straightness on plan |
S1 |
Straightness in section |
S1 |
T |
Thickness of bed joints |
S1 |
Tile hanging |
S1 |
Tile joints |
S1 |
Timber cladding |
S1 |
U |
Underfloor service ducts |
S1 |
V |
Variations in surface finish |
S1 |
W |
Walls and ceilings, appearance |
1.2, S1 |
Wall and ceiling surfaces |
S1 |
Walls and ceilings, tolerances |
1.2, S1 |
Windows and door openings |
|